Product Description
LE3360 3×360° Green Laser Level — Full Coverage. Zero Repositioning.
Most layout jobs grind to a halt when your laser only covers one plane at a time. The POWERTEC LE3360 eliminates that problem entirely. With three simultaneous full 360° laser planes — one horizontal and two vertical — you get complete floor-to-ceiling, wall-to-wall coverage from a single setup. Powered by a premium 515nm green laser diode delivering up to 4× better visibility than comparable red lasers, the LE3360 throws crisp, bright lines across every surface in the room, even in well-lit conditions.
Whether you're dropping a ceiling grid, setting tile layout lines, installing a run of upper cabinets, or framing a new partition wall, the LE3360 is built to keep pace. A 32-hour rechargeable battery, USB-C fast charging, remote control operation, and a fine-tune lift platform mean you spend less time fumbling with your tool and more time knocking out the job. ±0.2 mm/m accuracy at 33 ft and a working range up to 165 ft with a compatible receiver make this a serious layout tool for serious builders.
Key Features & Benefits
3×360° Full-Plane Coverage — One Setup, Every Wall
- Projects one 360° horizontal plane and two 360° vertical planes simultaneously, covering all four walls and the ceiling from a single instrument position — no repositioning, no wasted time.
- Full 3-axis coverage handles tiling, cabinet runs, drop ceilings, electrical layout, and framing alignment all from one setup.
- Self-levels automatically within ±3° and locks out with a visible warning when tilt exceeds the range — keeping your lines accurate and your work honest.
High-Visibility Green Laser — Sharp Lines, Bright Conditions
- Uses a SHARP-manufactured green laser diode at 515–532 nm — the spectrum the human eye is most sensitive to — for lines that are clearly visible indoors and in moderately lit outdoor environments.
- ±0.2 mm/m accuracy at 33 ft (10 m) ensures layouts stay tight across full wall and ceiling spans without drift or correction cuts.
- Pulse Mode (activated by holding the H button 3 seconds) extends working range to 165 ft (50 m) when used with a compatible laser detector — ideal for large commercial spaces and long layout runs.
32-Hour Battery & USB-C Fast Charging — Built for Full Workdays
- The 14.8V, 2000mAh Li-ion battery delivers up to 32 continuous hours in single-module mode — enough runtime to get through multiple long jobsite days without hunting for an outlet.
- USB-C fast charging brings the battery back to full in just 70 minutes — wall charger and cable included, so you're ready for the next day before you leave the site.
Remote Control + Adjustable Brightness — Work Smarter, Not Harder
- The included remote control lets you toggle individual laser lines and adjust brightness (weak / medium / strong) without touching the unit — essential when the laser is mounted on a ceiling, across a large room, or high on a tripod.
- Three brightness levels let you dial in visibility for the ambient light conditions on any jobsite — conserving battery when you don't need full power.
Lift Platform, IP54 Housing & Universal Mounting
- The included lift platform provides fine micro-adjustment control over line height — dial in exact positioning for door headers, cabinet rails, tile layout rows, and finish carpentry without moving the tripod.
- Standard 1/4"-20 threaded base mounts to most camera tripods; the included 5/8"-11 conversion chuck adapts to heavy-duty construction tripods and laser stands.
- IP54-rated ABS/PC housing with TPU overmolding and shock-protected laser modules resist dust, splashes, and the everyday bumps of a working jobsite.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
