Miter saw stands and saw stands: pick the right one in two minutes
A miter saw stand, or any saw stand, holds your saw at working height and supports long boards on both sides of the blade, so cuts stay safe and square. Match the stand to your tool, check the load rating and mounting holes, and you are done. Below you will find the right POWERTEC stand for your saw, how we compare with DeWalt, Milwaukee, Ryobi and Ridgid, and quick answers to common questions.
Jump to: Pick your stand · Miter saw stands · Compare brands · Check the fit · Set it up · FAQ
Pick your miter saw stand or saw stand
| Your tool and size | Our pick | Fit check | Key specs |
|---|---|---|---|
| Miter or chop saw, 10 in. and under | MT4008 miter saw stand | DeWalt, Milwaukee, Makita, Bosch, Ryobi, Ridgid, Metabo HPT, Craftsman, Kobalt and Skil saws fit when the hole spacing is 15-1/16 in. front to back or less. Example: Metabo HPT C10FCGS (10 in.) measures 8-9/16 in. and 14-1/16 in. | Anodized aluminum, 330 lb capacity, 6-3/4 in. treaded wheels, two tool trays, fold-out material supports, quick-release brackets, adjustable extension and roller bars. Replacement MT4000MBA brackets available. |
| Miter saw, 12 in., non-sliding | MT4008 miter saw stand | Same brands, same rule: 15-1/16 in. or less fits. Example: DeWalt DW715 (12 in.) measures 13 in. front to back. | Same MT4008: 330 lb capacity, wheels, two tool trays. |
| Miter saw, 10 or 12 in., sliding | MT4008 miter saw stand | Same brands. Measure first. If the holes are wider than 15-1/16 in., bolt the saw to a plywood adapter board. | Same MT4008: 330 lb capacity, wheels, two tool trays. Check the combined saw and board weight against 330 lb. |
| Portable table saw | MT4009 table saw stand | Compare your saw's base footprint with the stand's feet, or call us with your model. | Rolling and foldable, 22-5/8 in. bed height, 330 lb load rating, adjustable mounting plates. Fits saws with mounting hole spacing of 18-1/2 in. front to back and 20-5/8 in. side to side. |
| Band saw, drill press or grinder | UT1006V universal tool stand, UT1002 | Your tool's weight must stay under the rating: 400 lb (UT1006V) or 500 lb (UT1002). | UT1006V: 16-gauge steel, four heights from 30 to 36 in., fits 17201 casters. UT1002: 500 lb capacity, 32 in. work height with an adjustable MDF top to accommodate a wide variety of tool sizes. |
| Planer | UT1008 planer stand | Check your planer's footprint against the top and keep its weight under the rating on the product page. | 23-1/16 in. x 20-1/8 in. MDF top, built-in wheels, storage shelf and 300 lb capacity. |
| Router table | UT1006 router table stand, UT1010 folding stand | Match your router tabletop to the stand's top. UT1006 holds 400 lb and UT1010 holds 200 lb. | UT1006: adjustable height 30 to 36 in., works with 17201 casters, compatible with 24 x 36 in. router tables. UT1010: folds under 2 in. thick for easy storage, compatible with 24 x 36 in. router tables, adjustable height 30.7 to 35 in. |
| Sawhorse and bench in one | UT1015 folding workbench sawhorse, UT1014 folding worktable | No mounting needed. Check the load: UT1015 holds 1,000 lb and UT1014 holds 1,650 lb. | UT1015: eight heights, clamping with bench dog system. UT1014: instant setup, portable, folds to about 3.7 in. |
| Large portable workbench | Arachni-Flex portable workbench | Pick the size that fits your shop floor, from 2x4 ft to 4x8 ft. | Five sizes, with tabletops, clamps, dog holes, and T-track options. |
DeWalt, Milwaukee, Makita, Bosch, Ryobi, Ridgid, Metabo HPT, Craftsman, Kobalt and Skil are trademarks of their owners and are used only to describe compatibility.
Miter saw stands: rolling, folding and universal options
A miter saw stand holds the saw at a steady working height and supports long boards on both sides of the blade. Three choices separate one stand from another: whether it rolls and folds or stays fixed, how it mounts your saw, and how much weight it carries. Settle those before you compare brands.
Rolling, folding or fixed: which miter saw stand do you need?
| Stand type | Best for | Check before you buy | POWERTEC option |
|---|---|---|---|
| Rolling, folding miter saw stand | Job sites, garages and shared shops where the saw moves between jobs and the stand folds flat for storage | Wheel size and tread, feet that hold the stand still while you cut, weight capacity and how far the supports reach | MT4008: 330 lb capacity, 6-3/4 in. treaded rubber wheels, rubber-stop feet, two tool trays |
| Fixed-height universal stand | A permanent miter saw station in one spot, such as a corner of the shop | Working height, steel gauge, leveling feet and mounting slots | UT1006V universal tool stand: 400 lb capacity, 16-gauge steel, four working heights (30, 31, 34 and 36 in.), leveling feet |
| Universal stand on locking casters | A stand you want to roll out of the way without buying a folding stand | Caster rating, locks on the wheels and whether the stand needs drilling | UT1006V with POWERTEC 17201 locking casters, which need no drilling |
How to check that a miter saw stand fits your saw
- •Mounting holes. Measure front to back between the mounting holes on your saw's base. The MT4008's universal quick-release brackets fit saws with 15-1/16 in. or less. Wider than that, bolt the saw to a plywood adapter board.
- •Weight. Add the saw's weight to the lumber you load on it. The MT4008 is rated for 330 lb and the UT1006V for 400 lb. If you use an adapter board, count its weight too.
- •Support reach. Long boards need support on both sides of the blade. The MT4008's horizontal supports span 42 to 65-1/4 in., and its vertical rollers adjust from 35 to 39-1/2 in. above the floor.
- •Height. The MT4008's bed sits 32-1/2 in. off the ground, and its quick-release brackets sit 33-1/4 in. above the floor.
Do you need wheels on a miter saw stand?
Wheels matter if you move the saw between a garage, a driveway and a job site. The MT4008 rolls on 6-3/4 in. treaded rubber wheels and has rubber-stop feet so it stays put while you cut. For a permanent shop station, the UT1006V has integrated leveling feet for uneven floors and accepts POWERTEC 17201 locking casters if you later want to roll it.
How POWERTEC compares with DeWalt, Milwaukee, Ryobi and Ridgid
The miter saw stand comparison below sets the MT4008 against popular DeWalt, Milwaukee, Ryobi and Ridgid stands on price, capacity, reach, weight and wheels.
Miter saw stand comparison: POWERTEC vs DeWalt, Milwaukee, Ryobi, Ridgid and other brands
Here is how the MT4008 compares with popular miter saw stands on price, capacity, reach, weight, wheels and saw fit.
| Stand | Price | Capacity | Support reach | Weight | Wheels | Saw fit |
|---|---|---|---|---|---|---|
| POWERTEC MT4008 | $170 | 330 lb | Up to 65-1/4 in. | 35 lb | Yes, 6-3/4 in. | Hole spacing up to 15-1/16 in., adapter board for wider |
| DeWalt DWX723 | $180 | 500 lb | Up to 16 ft | 29 lb | No | Not specified |
| DeWalt DWX726 | $299 | 300 lb | Up to 8 ft | 67 lb | Yes | "Nearly any" saw |
| Milwaukee 48-08-0551 | $259 | 500 lb | Up to 100 in. | 31 lb | Not listed | "All brands" |
| Ryobi A18MS01G | $129 | 400 lb | Up to 9 ft | 42 lb | Not listed | Most saws up to 12 in. |
| Ridgid MS-UV | $189 | 300 lb | 9 ft 6 in. | 67 lb | Yes, 12 in. | "Most standard" saws |
| Bosch T4B | $419 | 300 lb | Up to 16 ft | Not listed | Yes | Not specified |
POWERTEC price is from powertecproducts.com. Other prices are Home Depot list prices in October 2026, before promotions. Capacity, reach and weight are manufacturer ratings. Check current listings before you buy.
Why the MT4008 stands out
- •Priced below most of the field. At $170, only the Ryobi costs less in this table. The DeWalt DWX723 is $180, the Ridgid is $189, and the Milwaukee, DeWalt DWX726 and Bosch run $259 to $419.
- •Wheels included. The 6-3/4 in. treaded wheels roll over cords and cracks. Buyers of the DeWalt DWX723 note it has none.
- •A fit spec you can check. We publish the exact mounting hole spacing, 15-1/16 in. or less. Other listings say "most" or "all" saws without a number, so you can measure your saw and know before you buy.
- •Light for a rolling stand. At 35 lb, it is about half the weight of the DeWalt DWX726 and the Ridgid, which each weigh 67 lb.
- •Rust-resistant aluminum with trays. The anodized aluminum frame resists corrosion and scratches, and two snap-in trays keep blades and fasteners within reach.
- •Proven family. Across more than 390 Home Depot reviews, POWERTEC's MT4000, MT4009 and UT1002 stands average about 4.3 stars.
When another stand is the better pick: choose a 500 lb stand like the DeWalt DWX723 or Milwaukee if your saw and stock regularly pass 330 lb, or if you cut very long boards.
Brand does not decide fit. Whether you own a DeWalt, Milwaukee, Ryobi, Ridgid, Bosch, Craftsman, Kobalt, Metabo, Skil, Delta or Hercules saw, check the mounting hole spacing, not the logo.
Check the fit before you buy
- •Mounting holes. Measure front to back on your saw's base. The MT4008 mounts most miter saws at 15-1/16 in. or less. For a wider saw, bolt it to a plywood adapter board and clamp the board to the stand.
- •Capacity. Add your saw's weight (many 10 in. and 12 in. saws run about 30 to 70 lb) to your heaviest board, then pick a stand rated well above that.
- •Height. Your forearm should be about level with the handle, which puts the saw table near 34 to 36 in. Add the saw's base height to the stand's bracket height (33-1/4 in. on the MT4008) to check.
- •Board support. Arms should sit level with the saw table or just below. For boards longer than the arms, add a roller stand at the same height.
Set up in 5 steps
- 1.Set the stand on firm ground, lock every leg and level the feet.
- 2.Clamp the saw into the brackets and check it swings through its full miter and bevel range.
- 3.Set the height so the handle sits near forearm level.
- 4.Lay a straightedge across the saw table and over the supports. They should touch it with no gap.
- 5.Set a stop block for repeat cuts and connect the saw to a dust collection system.
Saw stand FAQ
What is the best miter saw stand?
The best miter saw stand fits your saw's mounting holes, carries the saw plus your lumber, and supports long boards on both sides of the blade. If you move the saw between jobs, choose a rolling, folding stand such as the MT4008, with a 330 lb capacity, 6-3/4 in. wheels and supports that span 42 to 65-1/4 in. For a permanent shop station, a fixed stand such as the UT1006V, with a 400 lb capacity, works well.
Do I need a miter saw stand?
You need one if you cut long boards, move your saw between jobs or have little space. It keeps both ends of the board supported, which is safer. If you only cut short pieces on a fixed bench, a bench can do the job.
Will a POWERTEC stand fit my DeWalt, Milwaukee, Ryobi or Ridgid saw?
Most miter saws fit, whatever the brand. Fit depends on your saw's mounting hole spacing. The MT4008 takes saws with 15-1/16 in. or less between the holes. Call 847-780-6120 with your saw's model if you want us to confirm.
Are miter saw stands, mitre saw stands and chop saw stands the same thing?
Yes. They are different names for the same stand, and the MT4008 suits all three. It also holds other benchtop tools. Note: it is not recommended for planers, because a planer feeds front to back and could cause the stand to flip over.
Do I need a miter saw stand with wheels?
Choose wheels if you move the stand often or work on rough ground. Large treaded wheels, like the 6-3/4 in. wheels on the MT4008, roll over cords and cracks better than small casters.
Will the MT4009 fit my table saw?
Fit depends on your saw's base, not its brand. Compare your saw's base footprint with the stand's foot dimensions on the product page, or call us with your model.
What is the difference between a roller stand and a table saw stand?
A table saw stand holds the saw. A roller stand supports long boards as they leave the saw or the band saw. Set a roller stand to the table height. Many woodworkers use both.
Should I build a DIY stand or buy one?
A plywood stand works for a saw that never leaves the shop. Buy a stand if you move the saw, cut long stock or need to store it flat.
Can I put wheels on a universal tool stand?
Yes. The UT1006V works with POWERTEC 17201 locking casters with no drilling, and the UT1006 accepts a caster kit. Both are sold separately. Casters will not work with the UT1002; for mobility, add a mobile base. See our casters.