Product Description
72355 T-Track 4-Way Intersection — The Hub That Makes Complex Layouts Possible
T-intersections and corner connectors handle the basics. But when your jig design, assembly table layout, or modular workbench system demands a central hub where four track sections meet at a single point, there's only one fitting for the job. The POWERTEC 72355 4-Way Intersection Connector joins four T-track channels at 90° in a single drop-in fitting — giving you a true multi-directional junction that keeps clamps, stops, and fixtures accessible from all four sides of the layout. Sized for 3/4" × 3/8" T-track grooves with drop-in access for 1/4" and 5/16" T-bolts, it installs without end-loading or track disassembly.
This is the fitting that serious jig builders and dedicated shop builders reach for when their layouts outgrow simple straight runs and right-angle corners. A centered 4-way hub on a large assembly table means clamps and stops can be positioned from any direction, adapting instantly to whatever workpiece you're holding. Built from PA6 nylon reinforced with 30% glass fiber, the 72355 holds its geometry and drop-in access under the repeated loading of an active shop. If you're designing a T-track grid, a multi-zone fixture table, or an advanced modular jig system, this is the connector that ties the whole layout together. 8 connectors per pack gives you enough hubs to build out a full-scale grid in one order.
Key Features & Benefits
4-Way Intersection — Connect Four Track Sections at One Hub
- Joins four T-track sections at 90° in a single fitting, creating a central hub where hardware can travel in and be positioned from all four track directions simultaneously — the foundation of any true T-track grid layout.
- Eliminates the need to end four separate track runs at a dead zone — the 4-way hub keeps every connected channel live and accessible, maximizing fixture placement flexibility across the entire table surface.
- Ideal for large assembly tables, multi-zone fixture grids, advanced jig systems, and modular workbench layouts where a two-way or three-way junction simply isn't enough.
Drop-In Access — No End-Loading at the Hub
- Precision-engineered drop-in openings accept 1/4" and 5/16" T-bolts or 1/4" hex bolts directly into the channel at the intersection — no need to slide hardware from an exposed track end, even at the center of your layout.
- Add, remove, or reposition clamps and stops at the hub point without dismantling surrounding track sections — critical when you're reconfiguring a complex layout mid-project.
Built for Standard 3/4" × 3/8" T-Track Grooves
- Precision-sized for the most common woodworking T-track profile — fits router tables, drill press tables, workbenches, and shop-built jig systems without modification or shimming.
- Sits flush at the four-way junction to maintain a level, snag-free track surface across all four channel entries — hardware moves through the hub cleanly in every direction.
PA6+GF30 Glass-Fiber Reinforced Nylon — Grid-Worthy Strength
- Manufactured from PA6 nylon with 30% glass fiber reinforcement — engineered to maintain precise alignment across four channel entries under the multi-directional clamping and lateral forces a 4-way hub experiences in heavy use.
- Resists warping, loosening, and dimensional creep over time, so the hub stays tight and square even in high-traffic grid layouts where hardware travels the intersection repeatedly throughout the workday.
Versatile Applications — Grid Tables, Fixture Systems & Advanced Jig Builds
- The centerpiece connector for T-track grid assembly tables, multi-zone fixture boards, large-format jig systems, and any modular workbench layout requiring a true four-direction hub.
- Compatible with both standard 1/4" Mini T-Track and Universal (double-cut) T-Track systems — works across mixed track setups in the same layout. 8-pack covers a full grid build. Note: mounting screws not included.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
