Product Description
72353 T-Track 90° Corner Connectors — Right-Angle Layouts, Rock-Solid Joints
Building a crosscut sled, a fence system, or a dedicated jig table means you need corners — and open-ended T-track channels meeting at a right angle is not a corner, it's a weak point waiting to fail. The POWERTEC 72353 90° Corner Connectors bridge that gap cleanly. These drop-in fittings join two T-track sections at a precise right angle, creating a rigid, finished junction that holds its geometry through repeated use. Sized for 3/4" × 3/8" T-track grooves and compatible with 1/4" and 5/16" T-bolts, they slot in without end-loading or modification.
The difference between a jig that stays square and one that drifts over time often comes down to the quality of the connection at the corner. These connectors are built from PA6 nylon reinforced with 30% glass fiber — a material combination that delivers the rigidity of engineered plastic without the brittleness of standard nylon. Whether you're building a miter sled, a dedicated assembly table, a box joint jig, or a modular router fence system, the 72353 gives you accurate, repeatable 90° corners that stay true. 8 connectors per pack means you're covered for a full-scale build in a single order.
Key Features & Benefits
90° Corner Connection — Square Joints Without the Guesswork
- Precision-formed 90° geometry joins two T-track sections at a true right angle, eliminating the need to measure, clamp, and hope your corner stays square during assembly.
- Ideal for crosscut sleds, miter jig fences, router table fence systems, and any shop-built fixture where a square corner is critical to accurate results.
- Creates a rigid, locked joint at the track intersection — reducing flex and racking that can develop over time in unsupported corner connections.
Drop-In Access — Install at Any Point in the Channel
- Drop-in openings accept 1/4" and 5/16" T-bolts or 1/4" hex bolts directly into the channel at the connection point — no end-loading required, no need to disassemble your layout to add hardware.
- Installs and repositions quickly, keeping reconfiguration time low when you're adapting a jig for a new project or adjusting a fence setup mid-build.
Built for Standard 3/4" × 3/8" T-Track Grooves
- Precision-sized to fit the most common woodworking T-track profile — compatible with router tables, drill press tables, workbenches, and custom shop jigs without trimming or shimming.
- Seats flush at the corner junction, keeping the track surface clean and snag-free for workpieces moving through the system.
PA6+GF30 Glass-Fiber Reinforced Nylon — Rigid, Not Brittle
- Manufactured from PA6 nylon with 30% glass fiber reinforcement — significantly stiffer and more impact-resistant than plain nylon, holding its shape under the lateral and torsional forces a corner joint experiences during clamping and adjustment.
- Resists wear and deformation over years of repeated use — these corners won't loosen up or go out of square the way plain plastic connectors eventually do.
Versatile Applications — Sleds, Fences, Tables & Custom Jigs
- The right-angle connector for crosscut sleds, miter jig fences, router table fence systems, assembly tables, drill press fixtures, and any shop-built T-track layout requiring a true 90° corner.
- Compatible with both standard 1/4" Mini T-Track and Universal (double-cut) T-Track systems — one connector works across mixed track setups. 8-pack covers a full build. Note: mounting screws not included.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
