Product Description
70504 Magnetic Dust Collection Kit — Everything You Need to Connect Five Machines, Right Out of the Box
If you've been managing dust collection with hose clamps, taped adapters, or just leaving the collector disconnected between machines, this kit is the reset your shop needs. The POWERTEC 70504 Magnetic Dust Collection Fittings Kit comes loaded with 12 components covering both 4" and 2-1/2" machine ports — one magnetic connector, five steel ring receivers, five rubber cuffs, and a hose clamp — giving you everything required to build a complete, one-hose magnetic quick-connect system across up to five machines in a single purchase. Install the receivers once. After that, connecting your dust collector hose to any machine in the shop takes exactly one snap and zero tools.
Each connection in this system is held by 8 high-strength neodymium rare earth magnets in the connector ring, mating to zinc-plated steel receivers at the machine ports for a secure, airtight hold that stays locked through the full cut and releases cleanly on demand. The kit covers the two most common dust port sizes in any mixed shop — the 4" ports on full-size stationary machines like cabinet saws, planers, and jointers, and the 2-1/2" ports on benchtop tools like band saws, sanders, and drill presses. Whether you're setting up a new shop or finally bringing an existing one under control, the 70504 is the complete starting point for a magnetic dust collection system that actually matches how you work.
Key Features & Benefits
Complete 12-Piece Kit — Five Machines Covered in One Box
- Includes (1) 4" magnetic connector, (3) 4" steel port receivers, (2) 2-1/2" steel port receivers, (3) 4" rubber cuffs, (2) 2-1/2" rubber cuffs, and (1) 4" hose clamp — the complete hardware set to outfit five machine dust ports with quick-connect magnetic capability from a single purchase.
- Covers both 4" full-size machine ports (table saws, planers, jointers, wide belt sanders) and 2-1/2" benchtop ports (band saws, drill presses, random orbit sanders, shop vac-style machines) — no separate orders, no missing parts, no second trip.
- The rubber cuffs create a sealed, flexible transition between the steel ring receiver and the machine's dust port collar, accommodating minor size variations and port geometry differences for a snug, leak-free connection at every tool.
8-Magnet Quick-Connect System — Snap On, Pull Off, Move On
- The magnetic connector houses 8 neodymium rare earth magnets distributed evenly around the mating face, producing a balanced, airtight seal across the full 4" bore that holds steady during operation and releases with a single deliberate pull — no tools, no clamps, no wrestling.
- Transforms machine changes from a setup task into a one-second motion — move from the table saw to the planer to the band saw without stopping to reconnect, retighten, or retape anything between operations.
4" and 2-1/2" Port Coverage — One System, Every Machine
- The mixed receiver set covers the most common dust port sizes across a typical woodworking shop — three 4" receivers for full-size stationary machines and two 2-1/2" receivers for smaller benchtop tools, all operating through the same magnetic connector and hose.
- No separate adapter chain needed between machine types — the included rubber cuffs handle the transition at each port, and the single magnetic connector handles the hose side across all five machines.
Zinc-Plated Steel Rings & ABS Housings — Shop-Grade Throughout
- Every receiver in the kit uses a zinc-plated steel ring for the magnetic mating surface — corrosion-resistant, wear-resistant, and dimensionally stable through years of daily connect-disconnect cycles in a shop environment with humidity and temperature variation.
- Impact-resistant ABS housings on both the connector and receivers handle the incidental contact of a working shop without cracking, deforming, or losing magnetic alignment — install once, rely on it indefinitely.
The Smarter Alternative to Permanent Ducting
- A complete magnetic quick-connect system across five machines costs a fraction of a permanent multi-drop duct installation — no blast gates, no rigid pipe runs, no fixed shop layout locked in by your ductwork, and no contractor required to expand it later.
- Scales with your shop as it grows — add individual POWERTEC receivers (70499, 70501, 70503) to new machines anytime, using the same connector and hose already in the system. The 70504 kit is the complete foundation; everything else builds on it.
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
