Product Description
72295 Low-Profile Cyclone Dust Separator – Stop Cleaning Filters Every Session
Every woodworker running a shop vacuum knows the cycle: vacuum clogs mid-session, suction drops to nothing, you stop work to bang the filter clean or swap it out, debris gets everywhere, and you're back to mediocre suction within ten minutes. The POWERTEC 72295 Low-Profile Dust Separator breaks that cycle with cyclone separation technology that removes up to 99.9% of dry dust and debris into a standard 5-gallon bucket before anything reaches your vacuum filter — maintaining full suction across the entire work session, extending filter life from weeks to months, and protecting your vacuum motor from the fine dust that wears internal components over time. Compatible with 2-1/4" shop vacuum hose, 2-1/2" shop vacuum systems, and 4" dust collection ducting through the included adapters, it integrates with virtually any existing dust collection setup without requiring dedicated infrastructure.
Engineered for woodworkers, cabinet shops, renovation contractors, and DIY shop builders who understand that the real cost of a clogged filter is lost production time, not just the filter itself, this complete kit ships with every component required for installation — separator lid assembly, foam gasket, dual latches, 90° elbow, hose adapters, and 3-foot hose — eliminating the incomplete-kit frustration of buying additional fittings before you can start. The patented low-profile design keeps the center of gravity lower than tall cyclone designs, significantly improving stability on 5-gallon buckets during rolling movement when paired with the POWERTEC 70487 Bucket Dolly. Built from impact-resistant PP and ABS with a foam rubber gasket creating a dust-tight seal through dual latch closure, this system handles the sawdust, wood chips, drywall grit, and fine debris that a single session of table saw, sander, or router operation generates.
Key Features & Benefits
99.9% Pre-Separation Efficiency
- Cyclone airflow removes up to 99.9% of dry dust and debris before it reaches the vacuum filter — maintaining full suction performance across extended work sessions
- Protects HEPA and MERV-rated vacuum filters from premature clogging that reduces filtration efficiency and forces expensive early replacement
- Most debris collects in the easy-to-empty 5-gallon bucket rather than compacting inside the vacuum — visible fill level lets you empty at convenient intervals rather than reacting to suction loss
Multi-Port Compatibility — 2-1/4", 2-1/2" & 4"
- Included adapters enable connection to 2-1/4" shop vacuum hoses, 2-1/2" shop vac systems, AND 4" dust collection ducting — more port compatibility than most competing separators
- Adapts to cordless shop vacs (Milwaukee M18, DeWalt 20V), larger shop vac units, and dedicated dust collection systems without requiring separate products for each
- Single separator serves multiple vacuum systems in the same shop — move it between the dedicated dust collector and the shop vac depending on the operation
Low-Profile Design for Stability
- Patented compact low-profile lid keeps center of gravity lower than tall cyclone designs, significantly reducing the tipping risk that plagues standard bucket separators
- Lower profile pairs naturally with the POWERTEC 70487 Bucket Dolly — the combined system rolls around the shop floor without wobbling or tipping when changing direction
- Space-efficient design fits under workbenches and in tight shop corners where tall separator designs can't operate without obstruction
Sealed Construction with Dual-Latch Security
- Impact-resistant PP and ABS construction withstands daily shop use, shop floor impacts, and the vibration transmitted through vacuum hose connections during operation
- Foam rubber gasket and dual latch closure creates a dust-tight seal on any standard 5-gallon bucket — preventing the air leaks that reduce cyclone efficiency and allow bypass dust to reach the vacuum
- Secure seal maintains performance across repeated bucket-emptying cycles — attach, empty, reattach, and go without seal degradation
Complete Kit — Nothing Additional to Buy
- Ships with separator lid assembly, foam gasket, dual latches, 90° elbow, hose adapters, 3-ft hose, and grounding hardware — everything required for immediate installation
- Eliminates the "incomplete kit" frustration of buying a separator and then discovering you need additional fittings before it's operational
- 90° elbow and 3-foot hose provide setup flexibility for routing hoses around bench legs, along walls, or across tool configurations without kinked connections
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
