Product Description
14" Cold Saw Blade — Built for Clean Metal Cuts
Abrasive cutoff wheels throw sparks, chew through material fast, and leave a rough edge you'll be grinding down later. The POWERTEC 14013 solves that with 36 Triple Chip Grind (TCG) ceramic carbide teeth that cut steel and aluminum cool, clean, and dead-on straight — no sparks flying across the shop, no burr to clean up after.
Runs on any 14" cold saw or low-RPM chop saw with a 1" arbor, rated up to 1,600 RPM. Whether you're cutting angle iron, steel tubing, or aluminum extrusions, this blade is built for fabrication work where the cut has to be right the first time — not just fast.
Key Features & Benefits
Ceramic Carbide Alloy Cutting Teeth
- Carbide particles bonded with a metallic binder for higher heat tolerance than standard tungsten carbide tips
- Holds an edge up to 20% longer than standard carbide, so you're swapping blades less often on tough material
36-Tooth TCG Design
- Lower tooth count means faster feed rates on thicker stock without binding
- Triple Chip Grind alternates a trapezoidal tooth with a flat-top raker, spreading cutting force evenly across the edge
Reduced-Spark, Low-Heat Cutting
- Low-RPM cold cutting keeps sparks and airborne debris down compared to abrasive wheels
- Cooler cut temperature protects your workpiece finish and keeps heat out of your hands
Laser-Cut Stabilizer Vents
- Precision-cut vents pull heat away from the blade body, cutting down on warp and expansion mid-cut
- Reduces vibration and blade noise for a steadier, quieter pass
Non-Stick Coating & Broad Compatibility
- Teflon-based coating cuts down on friction and gumming, especially on aluminum and softer non-ferrous stock
- Fits standard 14" cold saws and chop saws with a 1" arbor — check your saw's max RPM against this blade's 1,600 RPM rating before mounting
WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
