null

Casters

Casters and Wheels for Workbenches, Carts and Furniture

Whether you want to move a heavy workbench, put a table saw on wheels, or replace a worn wheel on a cart or chair, the right caster comes down to three things: how much weight it carries, how it mounts, and the floor it rolls on. POWERTEC casters run from light-duty wheels for furniture and shop carts to industrial casters rated for 1,000 lbs and up. You will find swivel, fixed and locking casters, a workbench caster kit that lifts the bench only when you need to move it, and soft office chair casters that are gentle on hard floors. If you are not sure where to start, the selection guide below the products walks through each choice.

12 of 28 Items
12 of 28 Items

Selecting the Perfect Casters for Your Shop, Home, or Job Site

Caster TypeSelection CriteriaBest Used For (Applications)Key Features & Advantages
Light and medium-duty castersLoad capacityTool carts, shop vacuums, household furniture.Smooth, quiet rolling for everyday loads under 300 lbs.
Heavy-duty castersLoad capacityLarge table saws, loaded assembly tables, heavy machinery.Thick steel forks and reinforced bearings that support 1,000+ lbs.
Top plate castersMounting typeHeavy shop carts, large workbenches, wooden bases.The strongest mount: a wide, flat steel plate with four bolt holes spreads the load evenly.
Stem castersMounting typeTubular legs, mobile shelving, pre-drilled frames.A low-profile grip-ring or threaded stem fits straight into the leg or hole.
Office chair castersFloor protectionDesk chairs and rolling stools.Soft polyurethane wheels roll over hardwood, tile and laminate without leaving marks. Sold as a set of 5.
Swivel castersMovementTight garages and busy workspaces.Rotate a full 360 degrees, so heavy equipment is easy to steer in any direction.
Rigid (fixed) castersMovementLong carts, material handling, straight-line movement.Roll in one direction only, which helps a long cart track straight when used on the rear.
Dual-locking castersLocking systemPower tool stands, assembly tables, stationary setups.Lock the wheel and the swivel together for a solid base that will not pivot.
Workbench caster kitsApplication kitsTurning a stationary bench into a workbench on wheels.Retractable step-down casters lift the bench to move it, then lower it back onto its wooden legs.
Retractable leveling castersApplication kitsHeavy workbenches, woodworking machines, kitchen islands.The wheels retract and the leveling feet hold the machine steady once it is set down.
Furniture castersApplication kitsRemodels, antique restoration, home use.Non-marring polyurethane wheels glide smoothly and protect hardwood and tile floors.
Heavy-duty locking castersApplication kitsRough construction sites and uneven job-site floors.Dual-lock brakes and large-diameter wheels roll over debris and hold firm on uneven ground.

Choosing a caster is about more than matching a size. It is about safety, stability and how long your equipment or furniture will last. Whether you are replacing a broken wheel or upgrading a whole shop, work through the four questions below to narrow your options.

How to Choose Casters: Four Questions

1. Start with load capacity

The first thing to check is how much weight the casters must hold.

Tip: Divide the total load by 3, not 4. Floors are rarely level, so at any moment only three wheels may be carrying the weight.
  • •Light and medium duty: Good for tool carts, shop vacs and household furniture, with smooth rolling for loads under 300 lbs.
  • •Heavy duty (1,000+ lbs): Thick steel forks and reinforced bearings make these the right choice for large table saws, loaded assembly tables and other heavy machinery. See our heavy-duty swivel caster.

2. Choose how it mounts

How a caster attaches to your equipment decides how much it can safely carry.

  • •Top plate: The strongest option. A wide steel plate with four bolt holes spreads the load, which suits heavy machinery and shop carts. Plate casters bolt on from the top.
  • •Stem: A threaded or grip-ring stem pushes into tubular legs or pre-drilled holes, a tidy fit for chairs, shelving and furniture.

3. Decide how it moves and locks

Control and safety depend on how the wheel turns and how it stops.

  • •Swivel or rigid: Swivel casters turn 360 degrees for tight spaces. Rigid casters roll straight, so they are often used at the rear of a long cart for steering stability.
  • •Single or dual lock: A standard lock stops the wheel from rolling. A dual-locking caster also locks the swivel, so a cart or power tool stand turns into a steady workstation.

4. Match it to the job

If you would rather start with a ready-made solution, these are the common setups:

  • •Workbenches: Retractable step-down casters lift the bench to move it, then drop it solidly back onto its legs, so there is no vibration when you work.
  • •Furniture: Non-marring polyurethane wheels protect hardwood and tile floors without giving up weight capacity.
  • •Job sites: Dual-locking wheels with large diameters handle rough, uneven floors and stay put the moment the brake is set.

Casters & Wheels FAQ

Answers to the questions we hear most about sizing, locking and installing casters.

How do I calculate the weight capacity I need for heavy-duty casters?

Add the weight of the cart or bench to the heaviest load it will carry, then divide by three rather than four. Because shop and garage floors are rarely perfectly level, the weight can rest on just three wheels at a time. A cart that weighs 600 lbs fully loaded needs casters rated for at least 200 lbs each.

What is the difference between a single-lock and dual-locking caster?

A single lock presses a brake against the wheel so it cannot roll. A dual-locking caster also locks the swivel bearing, so the wheel cannot turn or pivot either. That matters for a workbench or a power tool stand, where you do not want any wiggle while you work.

Are polyurethane casters safe for hardwood floors?

Yes. Polyurethane is non-marring, so it carries heavy loads without scratching, denting or leaving black scuff marks on hardwood, tile or laminate. Our furniture casters use it for that reason.

Polyurethane vs. Rubber caster wheels: Which is better for a woodshop?

For most shops, polyurethane wheels are the better choice. Rubber absorbs shock well, but polyurethane handles heavier loads, rolls more easily and stands up to oils, shop chemicals and metal shavings that can damage softer rubber.

What size casters do I need for a heavy workbench?

Larger wheels roll more easily and clear sawdust, cords and floor cracks, so 3-inch to 5-inch casters suit a heavy bench. If you do not want to raise the bench height permanently, retractable casters lift it only when you need to move it.

How do I measure a caster stem size for a replacement?

Use calipers to measure the diameter of the metal stem and its length from the top of the stem down to the base of the wheel. Then note the type: a smooth grip-ring stem snaps in, while a threaded stem screws in like a bolt.

Should I choose plate casters or stem casters?

It depends on what you are mounting to. Plate casters bolt to flat wooden bases or thick metal plates and are the strongest choice for shop carts and heavy equipment. Stem casters go into pre-drilled holes or hollow tubular legs, which makes them the usual choice for office furniture and wire shelving.

What's the best caster for rough, uneven job-site floors?

Standard light-duty wheels will not hold up on construction sites or warehouse floors. Choose heavy-duty casters with large-diameter wheels that roll over debris and cracks, plus a dual-lock brake so the equipment stays put on a slope or an uneven surface.

How do I install casters on my equipment?

For plate casters, use four lag screws or through-bolts with washers, fastened into thick, load-bearing material. Stem casters either snap into a socket or thread into a nut. Whichever type you use, make sure the mounting hardware is rated for at least the same weight as the casters.